Cabinet Hardware and Soft-Close Upgrades in Phoenix

Knobs and pulls

Swapping knobs and pulls across a kitchen is quick when the new ones fit the old holes. Pulls are measured by the distance between their screw holes, and the common sizes are 3 inches, 96 millimeters and 128 millimeters. A pull with a different spacing means filling the old holes and drilling new ones, which we do, with the fills touched up so they don't show. A kitchen with knobs going to pulls needs new holes on every door, and a jig keeps them all in the same spot.

Soft-close hinges

Most concealed hinges can be swapped for soft-close hinges that fit the same holes in the door and the same plate in the cabinet. The door closes the last inch on its own, quietly. Some hinges take an add-on damper instead, a small piston that clips onto the existing hinge. We'll tell you which your doors can take.

Soft-close drawers

Drawers need slides with soft-close built in, so it's a slide swap rather than an add-on. Undermount soft-close slides are the quietest and hide under the drawer, but they need a drawer box sized for them. Side-mount soft-close slides fit most existing drawers.

Problems we fix on this page

• Want soft-close hinges
• Want new knobs and pulls installed
• Pull holes don't match the new hardware
• Cabinet hinges are the old exposed kind

How it starts

Send a photo of a door and a drawer from the front and a close-up of a hinge, plus a count of doors and drawers if you want hardware or soft-close across the kitchen. Fixed price up front, no surprises on the bill. We can install hardware you've already bought. Levi is on the job.